Quick Reference Guide

Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual

Virtual Private Networking 7-21

May 2004, 202-10031-01

Select whether enable or disable NAT (Network Address Translation). NAT allows all

LAN computers to gain Internet access via this Router, by sharing this Router's WAN IP

address. In most situations, NAT is essential for Internet access via this Router. You should

only disable NAT if you are sure you do not require it. When NAT is disabled, only

standard routing is performed by this Router.

c. Configure the WAN Internet Address according to the settings in Figure 7-11 above and

click Apply to save your settings. For more information on configuring the WAN IP

settings in the Basic Setup topics, please see “Manually Configuring Your Internet

Connection” on page 3-14.

d. From the main menu Advanced section, click the LAN IP Setup link.

e. Configure the LAN IP address according to the settings in Figure 7-11 above and click

Apply to save your settings. For more information on LAN TCP/IP setup topics, please

see “How to Configure LAN TCP/IP Setup Settings” on page 5-3.