Quick Reference Guide

Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual
7-20 Virtual Private Networking
May 2004, 202-10031-01
FVS328 Scenario 1: How to Configure the IKE and VPN Policies
Note: This scenario assumes all ports are open on the FVS328. You can verify this by reviewing
the security settings as seen in the “Using Inbound/Outbound Rules to Block or Allow Services”
on page 6-6.
Use this scenario illustration and configuration screens as a model to build your configuration.
Figure 7-11: LAN to LAN VPN access from an FVS328 to an FVS328
1. Log in to the FVS328 labeled Gateway A as in the illustration.
Log in to the firewall at its default LAN address of http://192.168.0.1 with its default user
name of
admin and default password of password, or using whatever Password and LAN
address you have chosen for the firewall.
2. Configure the WAN (Internet) and LAN IP addresses of the FVS328.
a. From the main menu Setup section, click the Basic Settings link.
Figure 7-12: FVS328 Internet IP Address menu
Gateway B
FVS328
Scenario 1
14.15.16.17 22.23.24.25
WAN IP
WAN IP
172.23.9.1/2410.5.6.1/24
LAN IP
LAN IP
Gateway A
WAN IP
addresses
ISP provides
these addresses