Quick Reference Guide

ProSafe VPN Firewall FVS318v3 Reference Manual
4-22 Basic Virtual Private Networking
v5.0, January 2012
Figure 4-23
2. Fill in the Connection Name and the pre-shared key, select the type of target end point, and
click Next to proceed.
Figure 4-24
3. Fill in the IP Address or FQDN for the target VPN endpoint WAN connection and click Next.
Enter the new Connection Name:
(GtoG in this example)
Enter the pre-shared key:
(12345678 in this example)
Select the radio button:
A remote VPN Gateway