Quick Reference Guide

ProSafe VPN Firewall FVS318v3 Reference Manual
Connecting the Firewall to the Internet 2-5
v5.0, January 2012
.
If you cannot connect to the VPN firewall, verify your computer networking setup. It should
be set to obtain both IP and DNS server addresses automatically, which is usually so. For help
with this, see Appendix B, “Related Documents” and click on the link to “Preparing a
Computer for Network Access” or the animated tutorials on the Resource CD.
2. Click OK. Follow the prompts to proceed with the Smart Wizard Configuration Assistant to
connect to the Internet.
3. Click Done to finish. If you have trouble connecting to the Internet, see “Troubleshooting
Tips” on page 2-6 to correct basic problems.
Figure 2-5
Note: If you do not see this page, type http://www.routerlogin.net in the browser
address bar and press Enter. If you still cannot see this screen, see “Bypassing
the Configuration Assistant” on page 2-10