Quick Reference Guide

ProSafe VPN Firewall FVS318v3 Reference Manual
Sample VPN Configurations with FVS318v3 C-27
v5.0, January 2012
Log in at the default address of http://192.168.0.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
2. Use the VPN Wizard to configure the FVS318v3 at Gateway A.
Follow the steps illustrated in Figure C-19 (the resulting parameter screens are shown in
Figure C-20):
• Connection Name: Scenario_1 (in this example)
• Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
• Connection Type: A Remote VPN Client
Figure C-20
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of http://10.5.6.1 at Gateway A.
Pre-Shared Key
must be the same
at both ends of
the VPN tunnel
Select “A Remote
VPN Client”