Quick Reference Guide

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
6-6 Virtual Private Networking
M-10146-01
Configuring a SA Using IKE Aggressive Mode
Click the VPN Settings link of the Setup section of the main menu, and then click the radio button
of a VPN tunnel, and then click the Edit button and choose Aggressive Mode from the Security
Association drop-down list to display the Aggressive Mode menu shown in Figure 6-4.
Figure 6-4: IKE - VPN Settings Aggressive Mode Configuration Menu
Pre-Shared Key Specify the key. Any value is acceptable, provided the remote VPN endpoint has
the same value in its Pre-Shared Key field.
Key Life The default is 3600 seconds (one hour).
IKE Life Time At the end of this time, the connection will drop, the security association will be
re-established, and the connection will be reactivated. The default is 28800
seconds (eight hours).
NETBIOS Enable If you need to run Microsoft networking functions such as Network
Neighborhood, click the NETBIOS Enable check box to allow NETBIOS traffic
over the VPN tunnel.
Table 6-1. Security Association Main Mode Configuration Fields
Field Description