Quick Reference Guide

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
5-6 Advanced WAN and LAN Configuration
M-10146-01
How to Enable UPnP
1. Log in to the Firewall at its default LAN address of http://192.168.0.1 with its default User
Name of
admin, default password of password, or using whatever User Name, Password and
LAN address you have chosen for the Firewall.
2. Click the LAN IP Setup link from the Advanced section of the main menu to display the menu
shown in Figure 5-3
Figure 5-2: Enabling UPnP via the LAN IP Setup Menu
3.
Click the Enable UPnP check box.
4. Click Apply to save your changes.