User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Net Mode Configuration Commands
70
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
net-config[dynamic-routing]>
first_key authentication_id 2rt!00jkl26ll7Oo0
net-config[dynamic-routing]>
first_key id_number 1
net-config[dynamic-routing]>
first_key valid_from day 01
net-config[dynamic-routing]>
first_key valid_from month 12
net-config[dynamic-routing]>
first_key valid_from year 2011
net-config[dynamic-routing]>
first_key valid_from hour 07
net-config[dynamic-routing]>
first_key valid_from minute 00
net-config[dynamic-routing]>
first_key valid_from second 00
net-config[dynamic-routing]>
first_key valid_to day 31
net-config[dynamic-routing]>
first_key valid_to month 12
net-config[dynamic-routing]>
first_key valid_to year 2011
net-config[dynamic-routing]>
first_key valid_to hour 23
net-config[dynamic-routing]>
first_key valid_to minute 59
net-config[dynamic-routing]>
first_key valid_to second 59
net-config[dynamic-routing]>
second_key authentication_id 3gry!!99OoiI
net-config[dynamic-routing]>
second_key id_number 2
net-config[dynamic-routing]>
second_key valid_from day 31
net-config[dynamic-routing]>
second_key valid_from month 12
net-config[dynamic-routing]>
second_key valid_from year 2011
net-config[dynamic-routing]>
second_key valid_from hour 24
net-config[dynamic-routing]>
second_key valid_from minute 00
net-config[dynamic-routing]>
second_key valid_from second 00
net-config[dynamic-routing]>
second_key valid_to day 31
net-config[dynamic-routing]>
second_key valid_to month 03
net-config[dynamic-routing]>
second_key valid_to year 2012
net-config[dynamic-routing]>
second_key valid_to hour 23
net-config[dynamic-routing]>
second_key valid_to minute 59
net-config[dynamic-routing]>
second_key valid_to second 59
net-config[dynamic-routing]>
save
Related show command: show net routing dynamic setup
IPv6 Routing Commands
net routing static ipv6 configure <route name>
This command configures an IPv6 static route. After you have issued the net routing
static ipv6 configure command to specify the name of the new route, you enter the
net-config [static-routing-ipv6] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
Step 1 Format net routing static ipv6 configure <route name>
Mode net