User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Net Mode Configuration Commands
61
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N>
net dmz ipv6 configure
net-ipv6-config[dmz]>
enable_dmz Y
net-ipv6-config[dmz]>
ip_address 2001:176::1
net-ipv6-config[dmz]>
prefix_length 64
net-ipv6-config[dmz]>
dhcp_enable Y
net-ipv6-config[dmz]>
dhcp_mode Stateful
net-ipv6-config[dmz]>
domain_name netgear.com
net-ipv6-config[dmz]>
server_preference 210
net-ipv6-config[dmz]>
dns_server_option useDnsProxy
net-ipv6-config[dmz]>
lease_time 43200
net-ipv6-config[dmz]>
save
Related show command: show net dmz ipv6 setup
net dmz ipv6 pool configure
This command configures a new or existing IPv6 DMZ address pool. After you have issued
the net lan ipv6 pool configure command, you enter the net ipv6-config-pool [dmz]
mode, and then you can configure the IPv6 start and end addresses and the IPv6 prefix
length for the IPv6 pool in the order that you prefer.
dns_server_option useDnsProxy,
useDnsFromISP, or
useEnteredDns
The DNS server type. If you select
useEnteredDns, you also need to issue the
primary_dns_server keyword and associated
parameter. The secondary_dns_server
keyword and associated parameter are optional.
primary_dns_server ipv6-address The IPv6 address for the primary DNS server in
the DMZ configuration.
secondary_dns_server ipv6-address The IPv6 address of the secondary DNS server in
the DMZ configuration.
lease_time seconds The duration in seconds for which an IP address
is leased.
Step 1 Format net dmz ipv6 pool configure
Mode net
Step 2 Format starting_ip_address <ipv6-address>
ending_ip_address <ipv6-address>
prefix_value <prefix length>
Mode net ipv6-config-pool [dmz]
Keyword Associated Keyword to
Select or Parameter to Type
Description