User's Manual

Net Mode Configuration Commands
60
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Related show command: show net dmz ipv4 setup
IPv6 DMZ Setup Commands
net dmz ipv6 configure
This command enables, configures, or disables the IPv6 DMZ. After you have issued the net
dmz ipv6 configure command, you enter the net ipv6-config [dmz] mode, and then you
can configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
Step 1 Format net dmz ipv6 configure
Mode net
Step 2 Format enable_dmz {Y | N}
ip_address <ipv6-address>
prefix_length <prefix length>
dhcp_enable {N | Y {dhcp_mode {Stateless | Stateful}}}
domain name <domain-name>
server_preference <number>
dns_server_option {useDnsProxy | useDnsFromISP | useEnteredDns
{primary_dns_server <ipv6-address>} [secondary_dns_server
<ipv6-address>]}
lease_time <seconds>
Mode net-ipv6-config [dmz]
Keyword Associated Keyword to
Select or Parameter to Type
Description
enable_dmz Y or N Enables or disables the DMZ.
ip_address ipv6-address The IPv6 address of the DMZ port.
prefix_length prefix length The prefix length (integer) for the DMZ port.
DHCPv6 server
dhcp_enable Y or N Enables or disables DHCP server for the DMZ.
dhcp_mode Stateless or Stateful The DHCPv6 mode (Stateless or Stateful).
domain_name domain name The server domain name (string) for the DHCP
server.
server_preference number The preference number (integer) of the DHCP
server.