User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Net Mode Configuration Commands
58
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Related show command: show net radvd lan setup
IPv4 DMZ Setup Commands
net dmz ipv4 configure
This command enables, configures, or disables the IPv4 DMZ. After you have issued the net
dmz ipv4 configure command, you enter the net ipv4-config [dmz] mode, and then you
can configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
Step 1 Format net dmz ipv4 configure
Mode net
Step 2 Format enable_dmz {Y | N}
ip_address <ipaddress>
subnet_mask <subnet mask>
dhcp_mode {None | DHCP-Server | DHCP-Relay}
dns_proxy_enable {Y | N}
domain_name <domain name>
starting_ip_address <ipaddress>
ending_ip_address <ipaddress>
primary_dns_server <ipaddress>
secondary_dns_server <ipaddress>
wins_server <ipaddress>
lease_time <hours>
enable_ldap {Y | N}
ldap_serverip <ipaddress>
ldap_search_base <search base>
ldap_port <number>
relay_gateway <ipaddress>
Mode net-ip4-config [dmz]
Keyword Associated Keyword to
Select or Parameter to Type
Description
enable_dmz Y or N Enables or disables the DMZ.
ip_address ipaddress The IP address of the DMZ port.
subnet_mask subnet mask The subnet mask of the DMZ port.