User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Net Mode Configuration Commands
46
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
net lan ipv4 default_vlan
This command configures the default VLAN for each port. After you have issued the net
lan ipv4 default_vlan command, you enter the net-config [lan-ipv4-defvlan] mode,
and then you can configure one keyword and associated parameter or associated keyword at
a time in the order that you prefer.
Command example:
FVS318N>
net lan ipv4 default_vlan
net-config[lan-ipv4-defvlan]>
port1 Default
net-config[lan-ipv4-defvlan]>
port2 Default
net-config[lan-ipv4-defvlan]>
port3 Management
net-config[lan-ipv4-defvlan]>
port4 Sales
net-config[lan-ipv4-defvlan]>
port5 Marketing
net-config[lan-ipv4-defvlan]>
port6 Sales
net-config[lan-ipv4-defvlan]>
port7 Remote
net-config[lan-ipv4-defvlan]>
port8 Default
net-config[lan-ipv4-defvlan]>
save
Step 1 Format net lan ipv4 default_vlan
Mode net
Step 2 Format port1 <vlan name>
port2 <vlan name>
port3 <vlan name>
port4 <vlan name>
port5 <vlan name>
port6 <vlan name>
port7 <vlan name>
port8 <vlan name>
Mode net-config [lan-ipv4-defvlan]
Keyword Associated
Parameter to Type
Description
port1
vlan name
Specifies the default VLAN name. You need to specify the name
for each port individually.
port2
port3
port4
port5
port6
port7
port8