User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Net Mode Configuration Commands
42
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Step 2 Format profile_name <name>
port_membership {[port 1 {Y | N}] | [port 2 {Y | N}] |
[port 3 {Y | N}] | [port 4 {Y | N}] | [port 5 {Y | N}] |
[port 6 {Y | N}] | [port 7 {Y | N}] | [port 8 {Y | N}]}
static address <ipaddress>
static subnet_mask <subnet mask>
dhcp mode {None | DHCP-Server | DHCP-Relay}
proxy dns_enable {Y | N}
dhcp domain_name <domain name>
dhcp start_address <ipaddress>
dhcp end_address <ipaddress>
dhcp primary_dns <ipaddress>
dhcp secondary_dns <ipaddress>
dhcp wins_server <ipaddress>
dhcp l
ease_time <hours>
enable_ldap {Y | N}
ldap_serverip <ipaddress>
ldap_search_base <search base>
ldap_port <number>
dhcp relay_gateway <ipaddress>
inter_vlan_routing {Y | N}
Mode net-config [lan-ipv4]
Keyword (might consist of
two separate words)
Associated Keyword to
Select or Parameter to Type
Description
profile_name name The name of the VLAN profile.
port_membership port1
Y or N
Specifies the ports that should be members of
the VLAN. You need to specify each port
individually.
port_membership port2
port_membership port3
port_membership port4
port_membership port5
port_membership port6
port_membership port7
port_membership port8
static address ipaddress The static IPv4 address for the VLAN.
static subnet_mask subnet mask The IPv4 subnet mask for the VLAN profile.