User's Manual

Table Of Contents
Net Mode Configuration Commands
36
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
selected ISP connection type, configure one keyword and associated parameter or
associated keyword at a time in the order that you prefer.
Step 1 Format net wan wan1 ipv6 configure
Mode net
Step 2 Format isp type {static | dhcpc}
static ip_address <ipv6-address>
static prefix <prefix-length>
static gateway_address <ipv6-address>
static primary_dns <ipv6-address>
static secondary_dns <ipv6-address>
dhcpc stateless_mode_enable {StatelessAddrAutoConfig
[prefix_delegation_enable {Y | N}] | StatefulAddrAutoConfig}
Mode net-config [wan1-ipv6]
Keyword (consists of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
isp type static or dhcpc The type of ISP connection:
static. Configure the keywords and
parameters in the Static section of this
table.
dhcpc. Configure the keywords and
parameters in the DHCPC section of
this table.
Static
static ip_address ipv6-address The IPv6 address of the WAN interface.
static prefix prefix-length The prefix length (integer) for the static
address.
static gateway_address ipv6-address The IPv6 address of the gateway.
static primary_dns ipv6-address The IPv6 address of the primary DNS
server.
static secondary_dns ipv6-address The IPv6 address of the secondary DNS
server.