User's Manual

Net Mode Configuration Commands
34
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
pppoe delay_in_reset seconds After the connection has been reset, the
number of seconds of delay before an
PPPoE connection attempt is made.
pppoe get_ip_dynamically Y or N Specifies whether or not the IP address is
dynamically received from the ISP. If it is not,
you need to issue the static_ip keyword
and enter the static IP address, and issue the
subnet_mask keyword and enter the
subnet mask.
pppoe static_ip ipaddress The static IP address if your IP address is not
dynamically received from the ISP.
pppoe subnet_mask subnet mask The subnet mask if your IP address is not
dynamically received from the ISP.
pppoe get_dns_from_isp Y or N Specifies whether or not the IP address is
dynamically received from the ISP. If you
select N, you need to issue the pppoe
primary_dns keyword and enter the IP
address of the primary DNS server. For a
secondary DNS server, issue the
pppoe secondary_dns keyword, and
enter the IP address.
pppoe primary_dns ipaddress The IP address of the primary DNS server if
your IP address is not dynamically received
from the ISP.
pppoe secondary_dns ipaddress The IP address of the optional secondary
DNS server if your IP address is not
dynamically received from the ISP.
PPTP (These keywords consist of two separate words)
pptp username user name The user name (alphanumeric string) to log
in to the PPTP service, if required.
pptp password password The password (alphanumeric string) to log in
to the PPTP service, if required.
pptp AccountName account name The PPPoE account name (alphanumeric
string).
pptp DomainName domain name The PPPoE domain name (alphanumeric
string).
pptp connectivity_type keepalive or
idletimeout
The type of PPTP connection. If you select
idletimeout, you need to issue the
pptp idle_time keyword and enter the
idle time-out period.
Keyword Associated Keyword to
Select or Parameter to Type
Description