User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Net Mode Configuration Commands
32
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword Associated Keyword to
Select or Parameter to Type
Description
isp_connection_type STATIC, DHCPC, PPPoE, or
PPTP
Specifies the type of ISP connection. You
can specify only one type of connection:
• STATIC. Configure the keywords and
parameters in the STATIC section of this
table.
• DHCPC. Configure the keywords and
parameters in the DHCPC section of this
table.
• PPPoE. Configure the keywords and
parameters in the PPPoE section of this
table.
• PPTP. Configure the keywords and
parameters in the PPTP section of this
table.
You need to confirm your selection by typing
Yes (that is, Yes, and not just Y).
Yes
isp_login_required Y or N Specifies whether or not your ISP requires
login if the type of ISP connection is PPPoE
or PPTP.
Static
static ip_address ipaddress The static IP address.
static subnet_mask subnet mask The subnet mask that is associated with the
static IP address.
static gateway_address ipaddress The IP address of the ISP gateway.
static primary_dns ipaddress The IP address of the primary DNS server.
static secondary_dns ipaddress The IP address of the optional secondary
DNS server.
DHCPC (These keywords consist of two separate words)
dhcpc account_name account name The ISP account name (alphanumeric
string).
dhcpc domain_name domain name The ISP domain name (alphanumeric string).
dhcpc client_identifier Y or N Specifies whether or not the DHCP
client-identifier option is sent to the ISP
server. By default, the option is not sent.
dhcpc vendor_identifier Y or N Specifies whether or not the DHCP
vendor-class-identifier option is sent to the
ISP server. By default, the option is not sent.