User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Net Mode Configuration Commands
31
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Step 2 Format isp_connection_type {STATIC | DHCPC | PPPoE | PPTP} Yes
isp_login_required {Y | N}
static ip_address <ipaddress>
static subnet_mask <subnet mask>
static gateway_address <ipaddress>
static primary_dns <ipaddress>
static secondary_dns <ipaddress>
dhcpc account_name <account name>
dhcpc domain_name <domain name>
dhcpc client_identifier {Y | N}
dhcpc vendor_identifier {Y | N}
dhcpc get_dns_from_isp {Y | N {dhcpc primary_dns <ipaddress>}
[dhcpc secondary_dns <ipaddress>]}
pppoe username <user name>
pppoe password <password>
pppoe AccountName <account name>
pppoe DomainName <domain name>
pppoe connectivity_type {keepalive | idletimeout {idletime
<minutes>}}
pppoe connection_reset {N | Y {reset_hou
r <hour>}
{reset_min <minutes>} {delay_in_reset <seconds>}}
pppoe get_ip_dynamically {Y | N {static_ip <ipaddress>}
{subnet_mask <subnet mask>}}
pppoe get_dns_from_isp {Y | N {primary_dns <ipaddress>}
[secondary_dns <ipaddress>]}
pptp username <user name>
pptp password <password>
pptp AccountName <account name>
pptp DomainName <domain name>
pptp connectivity_type {keepalive | idletimeout
{pptp idle_time <seconds>}}
pptp my_address <ipaddress>
pptp server_address <ipaddress>
pptp get_dns_from_isp {Y | N {pptp primary_dns <ipaddress>}
[pptp secondary_dns <ipaddress>]}
Mode net-config [wan1-ipv4]