User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Utility Commands
292
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
util restore_factory_defaults
This command restores the wireless VPN firewall to factory default settings. It takes about
3 minutes for the wireless VPN firewall to come back up.
Diagnostic Commands
util dns_lookup
This command looks up the IP address of a domain name.
FVS318N>
util dns_lookup netgear.com
Server: 66.80.130.23
Address 1: 66.80.130.23 ns1.megapath.net
Name: netgear.com
Address 1: 206.16.44.90
util ping
This command pings an IP address with 56 data bytes and displays the ping information.
FVS318N>
util ping 10.136.216.82
PING 10.136.216.82 (10.136.216.82): 56 data bytes
64 bytes from 10.136.216.82: seq=0 ttl=48 time=69.168 ms
64 bytes from 10.136.216.82: seq=1 ttl=48 time=112.606 ms
64 bytes from 10.136.216.82: seq=2 ttl=48 time=46.531 ms
64 bytes from 10.136.216.82: seq=3 ttl=48 time=49.804 ms
64 bytes from 10.136.216.82: seq=4 ttl=48 time=51.247 ms
--- 10.136.216.82 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 46.531/65.871/112.606 ms
Format util restore_factory_defaults
Mode util
Format util dns_lookup <domain name>
Mode util
Format util ping <ipaddress>
Mode util