User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Show Commands
268
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
SNMP Show Commands
show system snmp trap [agent ipaddress]
This command displays the SNMP trap configuration of an SNMP agent:
Trap Agent IP Address
_____________________
IP Address: 10.118.33.245
Subnet Mask: 255.255.255.255
Port: 162
Community: public
show system snmp sys
This command displays the SNMP system configuration of the wireless VPN firewall:
SNMP System Configuration
_________________________
SysContact: AdminFVS@netgear.com
SysLocation: San Jose
SysName: FVS318N-Bld3
Time Show Command
show system time setup
This command displays the time configuration and the configuration of the NTP server:
Time Zone & NTP Servers Configuration
_____________________________________
Current Time: Friday, April 13, 2012, 01:22:40 (GMT -0700)
Timezone: (GMT-08:00) Pacific Time(Canada), Pacific Time(US)
Automatically Adjust for Daylight Savings Time: Yes
Default NTP servers used : Yes