User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Show Commands
267
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Administrative and Monitoring Settings (System Mode)
Show Commands
This section contains the following subsections:
• Remote Management Show Command
• SNMP Show Commands
• Time Show Command
• Firmware Version Show Command
• Status Show Command
• Traffic Meter Show Command
• Logging Configuration Show Commands
• Logs Show Commands
Note: The VPN logs and RADIUS logs are part of the VPN Mode show
commands (see VPN Settings (VPN Mode) Show Commands on
page 280).
Remote Management Show Command
show system remote_management setup
This command displays the configuration of remote management for Telnet and HTTPS
access:
Remote Mgmt Configuration for telnet
____________________________________
IPv4 access granted to everyone
IPv6 access granted to a range of IPs from : FEC0::3001 to FEC0::3100
port being used : 23
Remote Mgmt Configuration for https
___________________________________
IPv4 access granted to everyone
IPv6 access granted to everyone
port being used : 445