User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Show Commands
263
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Address Filter Show Commands
show security address_filter enable_email_log
This command displays the configuration of the IP/MAC binding log:
Email logs for IP/MAC binding violation
_______________________________________
Email logs for IP/MAC binding violation: Enabled
Email logs for IP/MAC binding violation IPv6
____________________________________________
Email logs for IP/MAC binding violation: Disabled
show security address_filter ip_or_mac_binding setup
This command displays the IP/MAC bindings:
ROW ID Name MAC Address IP Address Log Dropped Packets IP Version
______ _____ _________________ _____________________ ___________________ __________
1 Rule1 00:aa:23:be:03:a1 192.168.10.153 Enabled IPv4
2 CFO a1:b2:c3:d4:ee:da 2001:3063:21a2:28e4:: Enabled IPv6
show security address_filter mac_filter setup
This command displays the configuration of the MAC filter and the MAC addresses for
source MAC filtering:
Source MAC Filter
__________________
MAC Filtering: Enabled
Policy for MAC Addresses: Block and Permit the rest
List of Available MAC Addresses
________________________________
ROW ID MAC Address
______ _________________
1 AA:11:BB:22:CC:33
2 a1:b2:c3:de:11:22
3 a1:b2:c3:de:11:25










