User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Show Commands
260
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
DMZ User: 176.16.2.65 - 176.16.2.85
Log: Never
LAN DMZ Inbound Rules.
______________________
ROWID: 101
Status: Enabled
Service Name: SSH:UDP
Filter: BLOCK by schedule,otherwise allow
DMZ User: 176.16.2.211
LAN User: 192.168.4.109
Log: Always
show security firewall ipv6 setup
This command displays all configured IPv6 firewall rules:
Default Outbound Policy
_______________________
For IPv6 : Allow Always
List of Available IPv6 Firewall Rules
_____________________________________
ROW ID Status Rule Type Service Action Source Users Destination Users Log Qos Priority Schedule
______ _______ __________ _______________ _________________________________ _______________________________________ ________________________ ______ ______________ _________
130 Enabled WAN To LAN RTELNET ALLOW Always 2002::B32:AAB1:fD41 FEC0::db8:145 Always Normal-Service
131 Enabled WAN To LAN HTTP ALLOW Always Any Any Never Normal-Service
132 Enabled LAN To WAN HTTP ALLOW Always Any Any Never Normal-Service
133 Enabled LAN To WAN HTTPS ALLOW Always Any Any Never Normal-Service
134 Enabled DMZ To WAN FTP ALLOW by schedule,otherwise block FEC0::db8:10a1:201 - FEC0::db8:10a1:299 2001:db6::30f4:fbbf:ccbc Never Normal-Service schedule1
135 Enabled WAN To DMZ VDOLIVE BLOCK Always Any 176::1150 - 176::1200 Always Normal-Service
136 Enabled DMZ To LAN RTSP:TCP BLOCK Always Any Any Always Normal-Service
137 Enabled DMZ To LAN RTSP:UDP BLOCK Always Any Any Always Normal-Service
138 Enabled LAN To DMZ ICMPv6-TYPE-134 BLOCK Always Any 176::1121 - 176::1142 Always Normal-Service
Attack Checks Show Commands
show security firewall attack_checks igmp
This command displays whether or not the IGMP proxy is enabled:
IGMP Configuration
__________________
Igmp Proxy: Disabled
show security firewall attack_checks jumboframe
This command displays whether or not jumbo frames are enabled:
Jumbo Frame Configuration
_________________________
Jumbo Frame Support: Enabled