User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Overview of the Configuration Commands
26
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
ipsec
(continued)
vpn ipsec vpnpolicy drop <vpn policy name> Terminate an IPSec VPN connection.
vpn ipsec vpnpolicy enable <vpn policy name> Enable an IPSec VPN policy.
vpn ipsec wizard configure <Gateway | VPN_Client> Configure the IPSec VPN wizard for a
gateway-to-gateway or gateway-to-VPN
client connection.
l2tp vpn l2tp server configure Configure the L2TP server.
radius vpn radius configure Configure the RADIUS servers.
sslvpn
vpn sslvpn client ipv4 Configure the SSL client IP address
range.
vpn sslvpn policy add Configure a new SSL VPN policy.
vpn sslvpn policy delete <row id> Delete an SSL VPN policy.
vpn sslvpn policy edit <row id> Configure an existing SSL VPN policy.
vpn sslvpn portal-layouts add Configure a new SSL VPN portal layout.
vpn sslvpn portal-layouts delete <row id> Delete an SSL VPN portal layout.
vpn sslvpn portal-layouts edit <row id> Configure an existing SSL VPN portal
layout.
vpn sslvpn portforwarding appconfig add Configure a new SSL port forwarding
application.
vpn sslvpn portforwarding appconfig delete <row id> Delete an SSL VPN port forwarding
application.
vpn sslvpn portforwarding hostconfig add Configure a new host name for an SSL
port forwarding application.
vpn sslvpn portforwarding hostconfig delete <row id> Delete a host name for an SSL port
forwarding application.
vpn sslvpn resource add Add a new SSL VPN resource.
vpn sslvpn resource configure add <resource name> Configure an existing SSL VPN resource.
vpn sslvpn resource delete <row id> Delete an SSL VPN resource.
vpn sslvpn route add Add an SSL VPN client route.
vpn sslvpn route delete <row id> Delete an SSL VPN client route.
vpn sslvpn users domains add Configure a new authentication domain.
vpn sslvpn users domains delete <row id> Delete an authentication domain.
Table 11. Configuration commands: vpn mode (continued)
Submode Command Name Purpose