User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Show Commands
256
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Not Valid After: 2011/12/31@23:59:59
Second Key Parameters
MD5 Key Id: 2
MD5 Auth Key: *****
Not Valid Before: 2011/12/31@24:00:00
Not Valid After: 2012/03/31@23:59:59
show net routing static ipv4 setup
This command displays the IPv4 static routes configuration:
Name Destination Gateway Interface Metric Active Private
---- ----------- ------- --------- ------ ------- -------
Orly 10.118.215.178 10.192.44.13 WAN1 7 1 1
show net routing static ipv6 setup
This command displays the IPv6 static routes configuration:
Name Destination Gateway Interface Metric Active
---- ----------- ------- --------- ------ -------
SFO2 2002:201b:24e2::1001 FE80::2001:5efe:ab23 WAN1 2 1
Network Statistics Show Commands
show net statistics {interface name | all}
This command displays the network statistics for a single or all Ethernet interfaces:
FVS318N> show net statistics eth0
Interface Statistics
____________________
IFACE: eth0
PktRx: 5688
ktTx: 5651
ByteRx: 654963
ByteTx: 4834187
ErrRx: 0
ErrTx: 0
DropRx: 0
DropTx: 0