User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Overview of the Configuration Commands
25
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Wireless Settings (Dot11 Mode) Configuration
Commands
Enter the dot11 ? command at the CLI prompt to display the description of all the
configuration commands in the dot11 mode. The following table lists the commands in
alphabetical order:
VPN Settings (VPN Mode) Configuration Commands
Enter the vpn ? command at the CLI prompt to display the description of all the configuration
commands in the vpn mode. The following table lists the commands in alphabetical order:
Table 10. Dot11 mode configuration commands
Submode Command Name Purpose
profile
dot11 profile acl configure <profile name> Configure an ACL for a specific profile.
dot11 profile configure <profile name> Configure a profile.
dot11 profile delete <profile name> Delete a profile.
dot11 profile disable <profile name> Disable a profile.
dot11 profile enable <profile name> Enable a profile.
dot11 profile wps configure Configure Wi-Fi Protected Setup™ (WPS).
radio
dot11 radio advanced configure Configure advanced radio settings.
dot11 radio configure Configure basic radio settings.
Table 11. Configuration commands: vpn mode
Submode Command Name Purpose
ipsec
vpn ipsec ikepolicy configure <ike policy name> Configure a new or existing manual IPSec
IKE policy.
vpn ipsec ikepolicy delete <ike policy name> Delete an IPSec policy.
vpn ipsec mode_config configure <record name> Configure a new or existing Mode Config
record.
vpn ipsec modeConfig delete <record name> Delete a Mode Config record.
vpn ipsec vpnpolicy configure <vpn policy name> Configure a new or existing auto IPSec
VPN policy or manual IPSec VPN policy.
vpn ipsec vpnpolicy connect <vpn policy name> Establish a VPN connection.
vpn ipsec vpnpolicy delete <vpn policy name> Delete an IPSec VPN policy.
vpn ipsec vpnpolicy disable <vpn policy name> Disable an IPSec VPN policy.