User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Show Commands
248
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPv6 Mode and IPv6 Tunnel Show Commands
show net ipv6 ipmode setup
This command displays the IPv6 routing mode configuration:
IP MODE
_______
IPv4 only mode : Disabled
IPv4/IPv6 mode : Enabled
show net ipv6_tunnel setup
This command displays the IPv6 tunnel configuration:
IPv6 Tunnels
____________
6 to 4 Tunneling
Automatic Tunneling is Enabled
List of Available ISATAP Tunnels
ROW ID LocalEndpoint ISATAP Subnet Prefix
______ _____________ ____________________
1 192.168.1.1 FE80::2006
2 10.29.33.4 FE80::DEFC
show net ipv6_tunnel status
This command displays the status of the IPv6 tunnels:
Tunnel Name IPv6 Address(es)
___________ __________________________________________________
sit0-WAN1 2002:408b:36e4::408b:36e4/64, ::127.0.0.1/96, ::192.168.1.1/96,
::10.139.54.228/96
isatap1-LAN fe80::5efe:421:1d0a/64, fe80::5efe:a1d:2104/64,
fe80::fe5e:0:a1d:2104/64
LAN DHCP Show Commands
show net lan dhcp leased_clients list
This command displays the LAN clients that received a leased DHCP IP address:
List of Available DHCP Leased Clients
_____________________________________