User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Overview of the Show Commands
243
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Wireless Settings (Dot11 Mode) Show Commands
Enter the show dot11 ? command at the CLI prompt to display the categories of show
commands in the dot11 mode. The following table lists the commands in alphabetical order:
VPN Settings (VPN Mode) Show Commands
Enter the show vpn ? command at the CLI prompt to display the categories of show
commands in the vpn mode. The following table lists the commands in alphabetical order:
time show system time setup Display the time configuration and the
configuration of the NTP server.
traffic_meter show system traffic_meter setup Display the configuration of the traffic meter
and the Internet traffic statistics.
Table 17. Show commands: show dot11 mode
Submode Command Name Purpose
acl show dot11 acl <profile name> Display the ACL policy and MAC addresses for
a specified profile.
profile show dot11 profile [profile name] Display basic information for all profiles or basic
and advanced information for a specified
profile.
show dot11 profile status <profile name> Display traffic statistics for a specified profile.
radio show dot11 radio Display the basic and advanced radio
configuration.
statistics show dot11 statistics Display cumulative wireless traffic statistics for
all profiles.
wps show dot11 wps Display the WPS configuration.
Table 18. Show commands: show vpn mode
Submode Command Name Purpose
ipsec
show vpn ipsec ikepolicy setup Display the IKE policies.
show vpn ipsec logs Display the IPSec VPN logs.
show vpn ipsec mode_config setup Display the Mode Config records.
Table 16. Show commands: show system mode (continued)
Submode Command Name Purpose