User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
236
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example: See the command example for the vpn sslvpn policy add command.
Related show command: show vpn sslvpn policy
vpn sslvpn policy delete <row id>
This command deletes an SSL VPN policy by specifying its row ID.
Related show command: show vpn sslvpn policy
RADIUS Server Command
vpn radius configure
This command configures a RADIUS server. After you have issued the vpn radius
configure command, you enter the [radius-config] mode, and then you can configure one
keyword and associated parameter or associated keyword at a time in the order that you
prefer.
Format vpn sslvpn policy delete <row id>
Mode vpn
Step 1 Format system radius configure
Mode vpn
Step 2 Format enable {Y | N}
radius-server <ipaddress>
secret <secret>
nas_identifier <identifier>
backup_server_enable {Y | N}
backup-radius_server <ipaddress>
backup_server_secret <secret>
backup_server_nas_identifier <identifier>
timeout <seconds>
retries <number>
Mode [radius-config]