User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
227
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword Associated Keyword to
Select or Parameter to Type
Description
policy_name policy name The policy name (alphanumeric string).
policy_type Global, Group, or User The SSL VPN policy type:
• Global. The policy is global and includes all
groups and users.
• Group. The policy is limited to a single group.
For information about how to create groups,
see SSL VPN Authentication Group
Commands. You need to issue the
policy_owner keyword and specify the
group name.
• User. The policy is limited to a single user.
For information about how to create user
accounts, see SSL VPN User Commands.
You need to issue the policy_owner
keyword and specify the user name.
policy_owner group name or user name The owner of the policy depends on the setting
of the policy_type keyword:
• Group. Specify the group name to which the
policy applies.
• User. Specify the user name to which the
policy applies.