User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
223
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N>
vpn sslvpn resource add
[sslvpn-resource-settings]>
resource_name TopSecure
[sslvpn-resource-settings]>
service_type PortForwarding
[sslvpn-resource-settings]>
save
Related show command: show vpn sslvpn resource
vpn sslvpn resource delete <row id>
This command deletes a resource by specifying its row ID.
Related show command: show vpn sslvpn resource
vpn sslvpn resource configure add <resource name>
This command configures a resource. (You first need to a add a resource with the vpn
sslvpn resource add command.) After you have issued the vpn sslvpn resource
configure add command to specify the resource that you want to configure, you enter the
[sslvpn-resource-settings] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Format vpn sslvpn resource delete <row id>
Mode vpn
Step 1 Format vpn sslvpn resource configure add <resource name>
Mode vpn
Step 2 Format object_type {IPAddress | IPNetwork}
For a single IP address:
ip_version {IPv4 {object_address <ipaddress>} | IPv6
{object_address6 <ipv6-address>}}
start_port <port number>
end_port <port number>