User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
222
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
[sslvpn-route-settings]>
subnet_mask 255.255.255.254
[sslvpn-route-settings]>
save
Related show command: show vpn sslvpn route
vpn sslvpn route delete <row id>
This command deletes a client route by specifying its row ID.
Related show command: show vpn sslvpn route
SSL VPN Resource Commands
vpn sslvpn resource add
This command adds a new resource. After you have issued the vpn sslvpn resource
add command, you enter the [sslvpn-resource-settings] mode, and then you can configure
one keyword and associated parameter or associated keyword at a time in the order that you
prefer.
Format vpn sslvpn route delete <row id>
Mode vpn
Step 1 Format vpn sslvpn resource add
Mode vpn
Step 2 Format resource_name <resource name>
service_type {VPNTunnel | PortForwarding | All}
Mode [sslvpn-resource-settings]
Keyword Associated Keyword to
Select or Parameter to Type
Description
resource_name resource name The resource name (alphanumeric string).
service_type VPNTunnel,
PortForwarding, or All
The type of service to which the resource applies:
• VPNTunnel. The resource applies only to a VPN
tunnel.
• PortForwarding. The resource applies only to port
forwarding.
• All. The resource applies both to a VPN tunnel and
to port forwarding.