User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
217
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N>
vpn sslvpn portforwarding appconfig add
[portforwarding-settings]>
server_ip 192.168.51.227
[portforwarding-settings]>
port 3389
[portforwarding-settings]>
save
Related show command: show vpn sslvpn portforwarding appconfig
vpn sslvpn portforwarding appconfig delete <row id>
This command deletes an SSL port forwarding application by specifying its row ID.
Related show command: show vpn sslvpn portforwarding appconfig
vpn sslvpn portforwarding hostconfig add
This command configures a new host name for an SSL port forwarding application. After you
have issued the vpn sslvpn portforwarding hostconfig add command, you enter
the [portforwarding-settings] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Keyword Associated
Parameter to Type
Description
server_ip ipaddress The IP address of the local server that hosts the application.
port number The TCP port number of the local server that hosts the application.
Format vpn sslvpn portforwarding appconfig delete <row id>
Mode vpn
Step 1 Format vpn sslvpn portforwarding hostconfig add
Mode vpn
Step 2 Format server_ip <ipaddress>
domain_name <domain name>
Mode [portforwarding-settings]