User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
212
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
vpn sslvpn users users delete <row id>
This command deletes a user account by specifying its row ID.
Related show command: show vpn sslvpn users users
vpn sslvpn users users login_policies <row id>
This command configures the login policy for a user. The command is not limited to SSL VPN
users. After you have issued the vpn sslvpn users users login_policies
command to specify the row ID that represents the user, you enter the
users-config [login-policy] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Command example:
FVS318N>
vpn sslvpn users users login_policies 5
users-config[login-policy]>
disable_login Y
users-config[login-policy]>
save
Related show command: show vpn sslvpn users users and show vpn sslvpn users login_policies
<row id>
Format vpn sslvpn users users delete <row id>
Mode vpn
Step 1 Format vpn sslvpn users users login_policies <row id>
Mode vpn
Step 2 Format deny_login_from_wan_interface {Y | N}
disable_login {Y | N}
Mode users-config [login-policy]
Keyword Associated Keyword
to Select
Description
deny_login_from_wan_interface Y or N Enables or disables login from the WAN
interface.
disable_login Y or N Enables or disables login from any interface.