User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
209
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Related show command: show vpn sslvpn users groups
vpn sslvpn users groups delete <row id>
This command deletes an authentication group by specifying its row ID.
Related show command: show vpn sslvpn users groups
SSL VPN User Commands
vpn sslvpn users users add
This command configures a new user account. The command is not limited to SSL VPN
users. After you have issued the vpn sslvpn users users add command, you enter the
users-config [users] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format vpn sslvpn users groups edit <row id>
Mode vpn
Step 2 Format domain_name <domain name>
group_name <group name>
idle_timeout <minutes>
Mode users-config [groups]
Keyword Associated
Parameter to Type
Description
domain_name domain name The domain name (alphanumeric string) to which the group
belongs.
Note: For information about configuring domains, see SSL VPN
Authentication Domain Commands.
group_name group name The group name (alphanumeric string).
idle_timeout minutes The idle time-out in minutes.
Format vpn sslvpn users groups delete <row id>
Mode vpn