User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
208
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
SSL VPN Authentication Group Commands
vpn sslvpn users groups add
This command configures a new authentication group that is not limited to SSL VPN users.
After you have issued the vpn sslvpn users groups add command, you enter the
users-config [groups] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Command example:
FVS318N>
vpn sslvpn users groups add
users-config[groups]>
domain_name Headquarter
users-config[groups]>
group_name Sales
users-config[groups]>
idle_timeout 15
users-config[groups]>
save
Related show command: show vpn sslvpn users groups
vpn sslvpn users groups edit <row id>
This command configures an existing authentication group that is not limited to SSL VPN
users. After you have issued the vpn sslvpn users groups edit command to specify
the row to be edited, you enter the users-config [groups] mode, and then you can configure
one keyword and associated parameter or associated keyword at a time in the order that you
prefer.
Step 1 Format vpn sslvpn users groups add
Mode vpn
Step 2 Format domain_name <domain name>
group_name <group name>
idle_timeout <minutes>
Mode users-config [groups]
Keyword Associated
Parameter to Type
Description
domain_name domain name The domain name (alphanumeric string) to which the group
belongs.
Note: For information about configuring domains, see SSL VPN
Authentication Domain Commands.
group_name group name The group name (alphanumeric string).
idle_timeout minutes The idle time-out in minutes.