User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
206
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
vpn sslvpn users domains edit <row id>
This command configures an existing authentication domain that is not limited to SSL VPN
users. After you have issued the vpn sslvpn users domains edit command to specify
the row to be edited, you enter the users-config [domains] mode, and then you can configure
one keyword and associated parameter or associated keyword at a time in the order that you
prefer.
Step 1 Format vpn sslvpn users domains edit <row id>
Mode vpn
Step 2 Format domain_name <domain name>
portal <portal name>
authentication_type {LocalUserDatabase | Radius-PAP |
Radius-CHAP | Radius-MSCHAP | Radius-MSCHAPv2 | WIKID-PAP |
WIKID-CHAP | MIAS-PAP | MIAS-CHAP | NTDomain |
ActiveDirectory | LDAP}
authentication_server1 <ipaddress>
authentication_secret <secret>
workgroup <group name>
ldap_base_dn <distinguished name>
active_directory_domain <domain name>
Mode users-config [domains]
Keyword Associated Keyword to
Select or Parameter to Type
Description
domain_name domain name The domain name (alphanumeric string).
portal portal name The portal name (alphanumeric string).
Note: For information about how to configure
a portal, see SSL VPN Portal Layout
Commands.