User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
204
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
vpn sslvpn portal-layouts delete <row id>
This command deletes an SSL VPN portal layout by specifying its row ID.
Related show command: show vpn sslvpn portal-layouts
SSL VPN Authentication Domain Commands
vpn sslvpn users domains add
This command configures a new authentication domain that is not limited to SSL VPN users.
After you have issued the vpn sslvpn users domains add command, you enter the
users-config [domains] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Format vpn sslvpn portal-layouts delete <row id>
Mode vpn
Step 1 Format vpn sslvpn users domains add
Mode vpn
Step 2 Format domain_name <domain name>
portal <portal name>
authentication_type {LocalUserDatabase | Radius-PAP |
Radius-CHAP | Radius-MSCHAP | Radius-MSCHAPv2 | WIKID-PAP |
WIKID-CHAP | MIAS-PAP | MIAS-CHAP | NTDomain |
ActiveDirectory | LDAP}
authentication_server1 <ipaddress>
authentication_secret <secret>
workgroup <group name>
ldap_base_dn <distinguished name>
active_directory_domain <domain name>
Mode users-config [domains]
Keyword Associated Keyword to
Select or Parameter to Type
Description
domain_name domain name The domain name (alphanumeric string).
portal portal name The portal name (alphanumeric string).
Note: For information about how to configure
a portal, see SSL VPN Portal Layout
Commands.