User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Overview of the Configuration Commands
20
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
radvd
net radvd configure dmz Configure the IPv6 RADVD for the DMZ.
net radvd configure lan Configure the IPv6 RADVD for the LAN.
net radvd pool dmz add Configure a new IPv6 RADVD pool for the
DMZ.
net radvd pool dmz delete <row id> Delete an IPv6 RADVD pool from the
DMZ.
net radvd pool dmz edit <row id> Configure an existing IPv6 RADVD pool
for the DMZ.
net radvd pool lan add Configure a new IPv6 RADVD pool for the
LAN.
net radvd pool lan delete <row id> Delete an IPv6 RADVD pool from the
LAN.
net radvd pool lan edit <row id> Configure an existing IPv6 RADVD pool
for the LAN.
routing
net routing dynamic configure Configure RIP and the associated MD5
key information.
net routing static ipv4 configure <route name> Configure a new or existing IPv4 static
route.
net routing static ipv4 delete <route name> Delete an IPv4 static route.
net routing static ipv4 delete_all Delete all IPv4 routes.
net routing static ipv6 configure <route name> Configure a new or existing IPv6 static
route.
net routing static ipv6 delete <route name> Delete an IPv6 static route.
net routing static ipv6 delete_all Delete all IPv6 routes.
wan
net wan port_setup configure Configure the MTU, port speed, and MAC
address of the wireless VPN firewall.
net wan wan1 ipv4 configure Configure the IPv4 settings of the WAN
interface.
net wan wan1 ipv6 configure Configure the IPv6 settings of the WAN
interface.
wan_settings net wan_settings wanmode configure Configure the mode of IPv4 routing (NAT
or classical routing) between the WAN
interface and LAN interfaces.
Table 7. Net mode configuration commands (continued)
Submode Command Name Purpose