User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
197
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
vpn ipsec vpnpolicy delete <vpn policy name>
This command deletes a VPN policy by specifying the name of the VPN policy.
Related show command: show vpn ipsec vpnpolicy setup
vpn ipsec vpnpolicy disable <vpn policy name>
This command disables a VPN connection by specifying the name of the VPN policy.
Related show command: show vpn ipsec vpnpolicy setup
vpn ipsec vpnpolicy enable <vpn policy name>
This command enables a VPN connection by specifying the name of the VPN policy.
Related show command: show vpn ipsec vpnpolicy setup
vpn ipsec vpnpolicy connect <vpn policy name>
This command establishes a VPN connection by specifying the name of the VPN policy.
Related show command: show vpn ipsec vpnpolicy setup and show vpn ipsec vpnpolicy status
Format vpn ipsec vpnpolicy delete <vpn policy name>
Mode vpn
Format vpn ipsec vpnpolicy disable <vpn policy name>
Mode vpn
Format vpn ipsec vpnpolicy enable <vpn policy name>
Mode vpn
Format vpn ipsec vpnpolicy connect <vpn policy name>
Mode vpn