User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
194
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
general_remote_subnet_mask
subnet mask If the general_remote_network_type
keyword is set to SUBNET, and if the
general_ip_version keyword is set to
IPv4, specifies the subnet mask.
general_remote_start_address_ipv6
ipv6-address If the general_remote_network_type
keyword is set to SINGLE, RANGE, or
SUBNET, and if the general_ip_version
keyword is set to IPv6, specifies the remote
IPv6 (start) address.
general_remote_end_address_ipv6
ipv6-address If the general_remote_network_type
keyword is set to RANGE, and if the
general_ip_version keyword is set to
IPv6, specifies the remote IPv6 end
address.
general_remote_ipv6_prefix_length
prefix length If the general_remote_network_type
keyword is set to SUBNET, and if the
general_ip_version keyword is set to
IPv6, specifies the prefix length.
Manual policy settings—Inbound policy
manual_spi_in
number The Security Parameter Index (SPI) for the
inbound policy as an hexadecimal value
between 3 and 8 characters.
manual_encryption_algorithm
None, DES, 3DES,
AES-128, AES-192,
AES-256
Specifies the encryption algorithm, if any, to
negotiate the security association (SA):
• None.
• DES. Data Encryption Standard (DES).
• 3DES. Triple DES.
• AES-128. Advanced Encryption Standard
(AES) with a 128-bit key size.
• AES-192. AES with a 192-bit key size.
• AES-256. AES with a 256-bit key size.
manual_encryption_key_in
key The encryption key for the inbound policy.
The length of the key depends on setting of
the manual_encryption_algorithm
keyword.
manual_encryption_key_out
key The encryption key for the outbound policy.
The length of the key depends on setting of
the manual_encryption_algorithm
keyword.
Keyword (might consist of two separate
words)
Associated
Keyword to Select
or Parameter to
Type
Description