User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Overview of the Configuration Commands
19
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
ipv6_tunnel
net ipv6_tunnel isatap add Configure a new IPv6 ISATAP tunnel.
net ipv6_tunnel isatap delete <row id> Delete an IPv6 ISATAP tunnel.
net ipv6_tunnel isatap edit <row id> Configure an existing IPv6 ISATAP tunnel.
net ipv6_tunnel six_to_four configure Enable or disable automatic (6to4)
tunneling.
lan
net lan dhcp reserved_ip configure <mac address> Bind a MAC address to an IP address for
DHCP reservation or change an existing
binding, and assign a LAN group.
net lan dhcp reserved_ip delete <mac address> Delete the binding of a MAC address to
an IP address.
net lan ipv4 advanced configure Configure advanced LAN settings such as
the MAC address for VLANs and ARP
broadcast.
net lan ipv4 configure <vlan id> Configure a new or existing VLAN.
net lan ipv4 default_vlan Configure the default VLAN for each port.
net lan ipv4 delete <vlan id> Delete a VLAN.
net lan ipv4 disable <vlan id> Disable a VLAN.
net lan ipv4 enable <vlan id> Enable a VLAN.
net lan ipv4 multi_homing add Configure a new secondary IPv4 address.
net lan ipv4 multi_homing delete <row id> Delete a secondary IPv4 address.
net lan ipv4 multi_homing edit Configure an existing secondary IPv4
address.
net lan ipv6 configure Configure the IPv6 LAN address settings
and DHCPv6.
net lan ipv6 multi_homing add Configure a new secondary IPv6 address.
net lan ipv6 multi_homing delete <row id> Delete a secondary IPv6 address.
net lan ipv6 multi_homing edit Configure an existing secondary IPv6
address.
net lan ipv6 pool configure Configure a new or existing IPv6 LAN
DHCP address pool.
net lan ipv6 pool delete <start ipv6-address> Delete an IPv6 LAN DHCP address pool.
net lan lan_groups edit <row id> <new group name> Change an existing LAN default group
name.
Table 7. Net mode configuration commands (continued)
Submode Command Name Purpose