User's Manual

VPN Mode Configuration Commands
186
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N> vpn ipsec ikepolicy configure FVS-to-Paris
vpn-config[ike-policy]> enable_mode_config N
vpn-config[ike-policy]> direction_type Both
vpn-config[ike-policy]> exchange_mode Main
vpn-config[ike-policy]> ip_version ipv4
vpn-config[ike-policy]> local_identtype Local_Wan_IP
vpn-config[ike-policy]> local_identifier 10.139.54.228
vpn-config[ike-policy]> remote_identtype Remote_Wan_IP
vpn-config[ike-policy]> remote_identifier 10.112.71.154
vpn-config[ike-policy]> encryption_algorithm 3DES
vpn-config[ike-policy]> auth_algorithm SHA-1
vpn-config[ike-policy]> auth_method Pre_shared_key
vpn-config[ike-policy]> pre_shared_key 3Tg67!JXL0Oo?
vpn-config[ike-policy]> dh_group Group2_1024_bit
vpn-config[ike-policy]> lifetime 28800
vpn-config[ike-policy]> enable_dead_peer_detection Y
vpn-config[ike-policy]> detection_period 20
vpn-config[ike-policy]> reconnect_failure_count 3
vpn-config[ike-policy]> extended_authentication EdgeDevice
vpn-config[ike-policy]> extended_authentication_type RadiusChap
vpn-config[ike-policy]> save
Related show command: show vpn ipsec ikepolicy setup
vpn ipsec ikepolicy delete <ike policy name>
This command deletes an IKE policy by specifying the name of the IKE policy.
Related show command: show vpn ipsec ikepolicy setup
IPSec VPN Policy Commands
vpn ipsec vpnpolicy configure <vpn policy name>
This command configures a new or existing auto IPSec VPN policy or manual IPSec VPN
policy. After you have issued the vpn ipsec vpnpolicy configure command to specify the
name of a new or existing VPN policy, you enter the vpn-config [vpn-policy] mode, and then
you can configure one keyword and associated parameter or associated keyword or
associated keyword at a time in the order that you prefer.
Format vpn ipsec ikepolicy delete <ike policy name>
Mode vpn