User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
183
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
remote_identtype Remote_Wan_IP, FQDN,
User-FQDN, or
DER_ASN1_DN
Specifies the ISAKMP identifier to be
used by the wireless VPN firewall:
• Remote_Wan_IP. The WAN IP address
of the remote endpoint. The setting of
the ip_version keyword determines if
you need to specify an IPv4 or IPv6
address for the local_identifier
keyword.
• FQDN. The domain name for the
wireless VPN firewall.
• User-FQDN. The email address for a
local VPN client or the wireless VPN
firewall.
• DER_ASN1_DN. A distinguished name
(DN) that identifies the wireless VPN
firewall in the DER encoding and ASN.1
format.
remote_identifier identifier The identifier of the remote endpoint. The
setting of the remote_identtype and
ip_version keywords determines the
type of identifier that you need to specify.
IKE SA settings
encryption_algorithm DES, 3DES, AES_128,
AES_192, or AES_256
Specifies the algorithm to negotiate the
security association (SA):
• DES. Data Encryption Standard (DES).
• 3DES. Triple DES.
• AES_128. Advanced Encryption
Standard (AES) with a 128-bit key size.
• AES_192. AES with a 192-bit key size.
• AES_256. AES with a 256-bit key size.
auth_algorithm MD5 or SHA-1 Specifies the algorithm to be used in the
VPN header for the authentication
process:
• SHA-1. Hash algorithm that produces a
160-bit digest.
• MD5. Hash algorithm that produces a
128-bit digest.
Keyword Associated Keyword to
Select or Parameter to Type
Description