User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
182
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Local and remote identifiers
ip_version IPv4 or IPv6 If the local_identtype and
remote_identtype keywords are set to
Local_Wan_IP, specifies the IP address
version for both the local and remote
endpoints:
• IPv4. Both endpoints use IPv4
addresses. You need to specify IPv4
addresses for the local_identifier
and remote_identifier keywords.
• IPv6. Both endpoints use IPv6
addresses. You need to specify IPv6
addresses for the local_identifier
and remote_identifier keywords.
local_identtype Local_Wan_IP, FQDN,
User-FQDN, or
DER_ASN1_DN
Specifies the ISAKMP identifier to be
used by the wireless VPN firewall:
• Local_Wan_IP. The WAN IP address of
the wireless VPN firewall. The setting of
the ip_version keyword determines if
you need to specify an IPv4 or IPv6
address for the local_identifier
keyword.
• FQDN. The domain name for the
wireless VPN firewall.
• User-FQDN. The email address for a
local VPN client or the wireless VPN
firewall.
• DER_ASN1_DN. A distinguished name
(DN) that identifies the wireless VPN
firewall in the DER encoding and ASN.1
format.
local_identifier identifier The identifier of the wireless VPN firewall.
The setting of the local_identtype
and ip_version keywords determines
the type of identifier that you need to
specify.
Keyword Associated Keyword to
Select or Parameter to Type
Description