User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
VPN Mode Configuration Commands
178
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPSec VPN Wizard Command
vpn ipsec wizard configure <Gateway | VPN_Client>
This command configures the IPSec VPN wizard for a gateway-to-gateway or
gateway-to-VPN client connection. After you have issued the vpn ipsec wizard
configure command to specify the type of peer for which you want to configure the wizard,
you enter the vpn-config [wizard] mode, and then you can configure one keyword and
associated parameter or associated keyword or associated keyword at a time in the order
that you prefer.
Step 1 Format vpn ipsec wizard configure {Gateway | VPN_Client}
Mode vpn
Step 2 Format ip_version {IPv4 | IPv6}
conn_name <name>
preshared_key <key>
remote_wan_ipaddress {<ipaddress> | <ipv6-address> |
<domain name>}
local_wan_ipaddress {<ipaddress> | <ipv6-address> |
<domain name>}
remote_lan_ipaddress <ipaddress>
remote_lan_net_mask <subnet mask>
remote_lan_ipv6address <ipv6-address>
remote_lan_prefixLength <prefix length>
Mode vpn-config [wizard]
Keyword Associated Keyword to
Select or Parameter to Type
Description
ip_version IPv4 or IPv6 Specifies the IP address version for both the
local and remote endpoints:
• IPv4. Both endpoints use IPv4 addresses.
For the remote LAN IP address, you need to
issue the remote_lan_ipaddress and
remote_lan_netMask keywords and
specify the associated parameters.
• IPv6. Both endpoints use IPv6 addresses.
For the remote LAN IP address, you need to
issue the remote_lan_ipv6address and
remote_lan_prefixLength keywords
and specify the associated parameters.
conn_name connection name The unique connection name (alphanumeric
string).