User's Manual

Dot11 Mode Configuration Commands
176
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
dot11 profile wps configure
This command configures Wi-Fi Protected Setup™ (WPS) for as SSID. After you have issued
the dot11 profile wps configure command, you enter the dot11-config [ap-wps]
mode, and then you can configure one keyword and associated parameter or associated
keyword at a time in the order that you prefer.
Command example:
FVS318N> dot11 profile wps configure
dot11-config[ap-wps]> ap_ssid CompanyWide
dot11-config[ap-wps]> wps_status Enable
dot11-config[ap-wps]> configure_via_pin Y
dot11-config[ap-wps]> station_pin 3719
dot11-config[ap-wps]> save
Related show command: show dot11 wps
Step 1 Format dot11 profile wps configure
Mode dot11
Step 2 Format ap_ssid <ssid name>
wps_status {Enable | Disable}
configure_via_pbc {Y | N}
configure_via_pin {N | Y {station_pin <pin>}}
Mode dot11-config [ap-wps]
Keyword Associated Keyword to
Select or Parameter to Type
Description
ap_ssid ssid name The name of the SSID for which you configure WPS.
wps_status Enable or Disable Enables or disables WPS.
configure_via_pbc Y or N Enables or disables the push button configuration
(PBC) method.
configure_via_pin Y or N Enables or disables the PIN method. If you enable
the PIN method, you also need to set the
station_pin keyword and associated parameter.
station_pin pin The pin for the PIN method, if the PIN method is
enabled.