User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Dot11 Mode Configuration Commands
173
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N>
dot11 profile add Employees
dot11-config[profile]>
ssid CompanyWide
dot11-config[profile]>
broadcast_ssid Y
dot11-config[profile]>
security_type WPA+WPA2
dot11-config[profile]>
wpa encryption TKIP+CCMP
wpa authentication PSK, RADIUS, or PSK+RADIUS The WPA authentication type. Note the following:
• PSK. Requires you to set the
wpa wpa_password keyword and associated
parameter.
• RADIUS. Requires you to configure the RADIUS
settings.
• PSK_RADIUS. Requires you to set the wpa
wpa_password keyword and associated
parameter and to configure the RADIUS
settings.
wpa wpa_password password The WPA password, which you need to set only if
you have set the wpa authentication
keyword to PSK or PSK_RADIUS.
pre-authentication Y or N Enables or disables RADIUS preauthentication,
which is possible only if you have set the
security_type keyword to WPA2 and the wpa
authentication keywords to RADIUS.
Active timer and WLAN partition
enable_active_time Y or N Enables or disables the daily timer for the wireless
profile. If you enable the timer, you need to set all
start and stop keywords and associated
parameters and keywords.
start hour hour The hour in the format H or HH (1 through 12) that
the timer starts, if you have enabled the timer.
start meridiem AM or PM The meridiem that the timer starts, if you have
enabled the timer.
start minute minute The minute in the format MM (00 to 59) that the
timer starts, if you have enabled the timer.
stop hour hour The hour in the format H or HH (1 through 12) that
the timer stops, if you have enabled the timer.
stop meridiem AM or PM The meridiem that the timer stops, if you have
enabled the timer.
stop minute minute The minute in the format MM (00 to 59) that the
timer stops, if you have enabled the timer.
wlan_partition Y or N Enables or disables WLAN partition.
Keyword (might consist
of two separate words)
Associated Keyword to Select
or Parameter to Type
Description