User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Dot11 Mode Configuration Commands
172
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
security_type Open, WEP, WPA, WPA2, or
WPA+WPA2
The type of security and associated encryption.
Your selection determines which other keywords
and associated parameters and keywords you
need to set.
vlan_profile vlan name The VLAN to which the wireless profile is
allocated. If you do not specify a VLAN, the
wireless profile is assigned to the default VLAN.
WEP
wep authentication Automatic, Open-System, or
Shared-Key
The type of WEP authentication:
• Automatic. A key is required to connect to this
profile. You need to configure the wep
passphrase keyword and its associated
parameter and keyword for automatic generation
of the WEP key. You also need to set the
wep encryption keyword and its associated
keyword.
• Open-System. Anyone can connect to this
profile. You need to set the wep encryption
keyword and its associated keyword.
• Shared-Key. A key is required to connect to this
profile. You need to set the wep key keyword
and its associated parameter and keyword for
manual generation of the WEP key. You also
need to set the wep encryption keyword and
its associated keyword.
wep encryption 64-bit-WEP or 128-bit-WEP The type of WEP encryption.
wep passphrase 1, 2, 3, or 4 and passphrase Both the number of the WEP key (the index) and
the passphrase to generate the WEP key from.
You have to set both.
wep key 1, 2, 3, or 4 and key Both the number of the WEP key (the index) and
the actual key.
Note: If you have used the wep passphrase
keyword and its associated parameter and
keyword, you do not need to set the wep key
keyword and its associated parameter and
keyword.
WPA
wpa encryption TKIP, CCMP, or TKIP+CCMP The WPA encryption type. Note the following:
• WPA supports TKIP and TKIP+CCMP.
• WPA2 supports CCMP and TKIP+CCMP.
• WPA+WPA2 supports TKIP+CCMP.
Keyword (might consist
of two separate words)
Associated Keyword to Select
or Parameter to Type
Description