User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Dot11 Mode Configuration Commands
165
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
default_transmit_power number The default transmit power in dBm, which
can range from 0 to 31.
Note: If the country regulation does not
allow the transmit power that you
configure, the power will be automatically
adjusted to the legally allowed power.
transmission_rate Best_Automatic,
MCS15-130[270],
MCS14-117[243],
MCS13-104[216],
MCS12-78[162],
MCS11-52[108], MCS10-39[81],
MCS9-26[54], MCS8-13[27],
MCS7-65[135],
MCS6-58.5[121.5],
MCS5-52[108], MCS4-39[81],
MCS3-26[54],
MCS2-19.5[40.5],
MCS1-13[27], MCS0-6.5[13.5],
54, 48, 36, 24, 18, 12, 11, 9, 6,
5.5, 2, or 1
The transmission data rate. Either select
Best_Automatic to enable the wireless
access point to select its own data rate, or
select a specific data rate.
Note: The available transmission data
rates depend on the country selection and
are displayed on the CLI screen.
Table 13. Region and country keywords
Region Country
Africa Algeria
Egypt
Kenya
Morocco
SouthAfrica
Tunisia
Zimbabwe
Asia Azerbaijan
Bangladesh
BruneiDarussalam
China
HongKong
India
Keyword Associated Keyword to Select or
Parameter to Type
Description