User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
System Mode Configuration Commands
162
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N>
system logging remote configure
system-config[logging-remote]>
log_identifier FVS318N-Bld3
system-config[logging-remote]>
email_logs_enable Y
system-config[logging-remote]>
email_server SMTP.Netgear.com
system-config[logging-remote]>
return_email FVS318N@netgear.com
system-config[logging-remote]>
send_to_email admin2@netgear.com
system-config[logging-remote]>
smtp_custom_port 2025
system-config[logging-remote]>
smtp_auth type None
system-config[logging-remote]>
schedule unit Weekly
system-config[logging-remote]>
schedule day Sunday
system-config[logging-remote]>
schedule time 00
system-config[logging-remote]>
schedule meridiem AM
system-config[logging-remote]>
syslog_server fe80::a0ca:f072:127f:b028%21
system-config[logging-remote]>
syslog_severity LOG_EMERG
system-config[logging-remote]>
save
Related show command: show system logging remote setup
Syslog server
syslog_server ipaddress or domain name The IP address or domain name of
the syslog server.
syslog_severity LOG_EMERG, LOG_ALERT,
LOG_CRITICAL,
LOG_ERROR, LOG_WARNING,
LOG_NOTICE, LOG_INFO, or
LOG_DEBUG
The syslog severity level. The
keywords are self-explanatory.
Note: All the logs with a severity
that is equal to and above the
severity that you specify are logged
on the specified syslog server. For
example, if you select
LOG_CRITICAL as the severity,
then the logs with the severities
LOG_CRITICAL, LOG_ALERT, and
LOG_EMERG are logged.
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description